Forced Ventilating Rolling Bearing Smelting Furnace Motor Blower
Fan
Introduction
The 9-08 series high pressure fan is generally used for forging
furnace and high pressure forced ventilation, and can be widely
used to transport materials, transport air and non-corrosive,
non-self-igniting, non-viscous substances gas.
The temperature of the medium generally does not exceed 50 ° C
(maximum not more than 80 ° C). The dust and hard particles
contained in the medium are not more than 150 mg/m3.
For flammable and explosive gas transportation, the impeller can be
processed with aluminum alloy to prevent sparks during operation.
The fan with explosion-proof motor, and its performance parameters
are the same as those ordinary motors.
The fan has high efficiency, low noise, flat performance curve and
wide area of high efficiency.
Application
The 9-08 series high pressure fan is generally used for forging
furnace and high pressure forced ventilation, and can be widely
used to transport materials, transport air and non-corrosive,
non-self-igniting, non-viscous substances gas.
Technical data
| series | model | Rotation Speed
(r/min) | Total Pressure
(Pa) | Air Capacity
(m3/h) | Power
(kW) |
| 9-08 | 7.1D | 2900 | 10635～12427 | 12292～19360 | 75～110 |
| 8D | 1450～2900 | 3249～15955 | 8792～27696 | 18.5～200 |
| 9D | 1450 | 4181～4869 | 12518～19717 | 30～45 |
| 10D | 1450 | 5065～6143 | 17172～30052 | 55～75 |
| 11.2D | 960～1450 | 3031～7747 | 15973～42221 | 30～132 |
| 12.5D | 960～1450 | 3450～9713 | 22206～58695 | 45～250 |
| 14D | 960～1450 | 4341～12285 | 31197～82463 | 75～400 |
| 16D | 960～1450 | 5696～16250 | 46569～123090 | 185～850 |
Advantages and Features
1.The fan can output higher gas pressure, and can provide more gas
flow at the same time, low noise.
2. In the case of using the common base, the installation is very
simple and basically does not require the support of professional
technicians.
3. The motor shaft is elastically connected with the drive shaft.
It is not necessary to tighten the belt or replace the belt
frequently, and the maintenance workload is small.
4. The fan system running at normal temperature with an impeller
diameter of less than 1400 mm does not require additional
configuration of bearing cooling device, which reduces the user's
investment and maintenance workload.
5. When the airflow resistance is increased, the motor load will be
automatically reduced and the motor will not be burnt.
6.The fan is made of high quality carbon steel, and can also use
stainless steel or other metal materials according to customer
requirements.
7. Running test and vibration value detection after the production
is completed, the fan operation is reliable.
FAQ
1. What parameters need to be provided when you design the Heat
Dissipation Power Plant Blower Fan?
Answers: Air flow, total pressure or static pressure, inlet
temperature, local voltage and frequency, Altitude etc.
If there is flammable and explosive gas, or big dust loading in the
medium, please also inform the designer.
2. How about your company’s pre-sales service and after-sales
service?
Answers: Before our cooperation, we have the professional technical
team to help you make the technical solution according to your
working condition, to make sure the centrifugal fan efficiency
operation.
After sales service, we will offer 12 months’ repairing service,
and provide lifelong follow-up services. Besides, our engineers are
available for going abroad to offer the repairing service.
3. Does your company have qualifications?
Answers: SIMO Blower has obtained ISO 9001-2008, CE, BV
certifications and so on.
