16Mn Coupling Driving Long Life Drying Flue Gas Blower Fan
Introduction
The 6-06 series dust exhaust centrifugal fan has the
characteristics of low dust accumulation and wear resistant.
It is suitable for discharging gas containing dust, wood chips and
finely divided fibers (If it contains hard particles, a dust
removal device must be installed in front of the fan.), it can also
be used as a general ventilator for ventilation.
It can output higher outlet pressure and provide more gas flow at
the same time, low noise.
The fan speed can be flexibly set by matching different belt pulley
diameters to make the fan run at the highest efficiency point and
reduce energy waste.
Motor slide guide can be provided for convenient belt tensioning to
reduce energy loss caused by belt slack.
Technical data
| series | model | Rotation Speed
(r/min) | Total Pressure
(Pa) | Air Capacity
(m³/h) | Power
(kW) |
| 6-06 | 8D | 1450 | 1859～2745 | 11000～26400 | 15 ~ 22 |
| 9D | 1450 | 2353～3474 | 15700～37500 | 30 ~ 45 |
| 10D | 1450 | 2905～4289 | 21500～51500 | 45 ~ 75 |
| 11D | 960 ~ 1450 | 1541～5190 | 22700～68500 | 22 ~ 110 |
| 12D | 960 ~ 1450 | 1834～6176 | 24600～89000 | 37 ~ 160 |
| 13D | 960 ~ 1450 | 2152～7248 | 31200～113000 | 55 ~ 250 |
| 14D | 960 ~ 1450 | 2496～8406 | 39000～141000 | 75 ~ 400 |
| 15D | 730 ~ 1450 | 1657～9650 | 36600～172000 | 45 ~ 500 |
| 16D | 730 ~ 1450 | 1885～10980 | 44300～211000 | 75 ~ 710 |
| 17D | 730 ~ 960 | 2128～5433 | 53200～168000 | 90 ~ 280 |
| 18D | 730 ~ 960 | 2386～6091 | 63100～199000 | 110 ~ 355 |
| 19D | 730 ~ 960 | 2658～6787 | 74200～234000 | 160 ~ 500 |
| 20D | 730 ~ 960 | 2946～7520 | 86700～273000 | 200 ~ 630 |
| 21D | 580 ~ 960 | 2050～8290 | 79500～316000 | 200 ~ 800 |
| 22D | 580 ~ 960 | 2250～9099 | 92200～363000 | 220 ~ 1000 |
| 23.5D | 580 ~ 960 | 2567～10380 | 112000～443000 | 220 ~ 1400 |
| 25D | 580 ~ 730 | 6794～6464 | 134000～406000 | 355 ~ 800 |
| 26.5D | 480 ~ 730 | 2236～7633 | 132000～483000 | 220 ~ 1120 |
| 28D | 480 ~ 730 | 2496～8522 | 156000～569000 | 315 ~ 1400 |
| 29.5D | 480 ~ 730 | 2771 ~ 9460 | 183000～667000 | 400 ~ 2000 |
Advantages and Features
1. The bearing housing is reserved for the installation position of
temperature and vibration sensors, which can facilitate the
installation of fan operation monitoring device.
2. Use liquid lubricating oil. It is not necessary to open the
bearing housing to replace and fill the lubricating oil. The
bearing housing is provided with an observation window for easy
observation of the quality and stock of the lubricating oil.
3. The bearing housing uses labyrinth mechanical seal, unique
anti-leakage design inside, vent hole at the top, and sealing
grease at the joint, completely eliminating the possibility of oil
leakage in the bearing hosing.
4. After annealed treatment, the internal stress of the structure
generated during welding can be completely eliminated to ensure
that the impeller will not creepage and crack.
5. The impeller is subjected to a high standard of dynamic
balancing adjusting to ensure stable operation of the fan.
6. After running test and vibration value detection, the operation
is reliable.
FAQ
1. What parameters need to be provided when you design the
industrial centrifugal fans?
Answers: Air flow, total pressure or static pressure, inlet
temperature, local voltage and frequency, Altitude etc.
If there is flammable and explosive gas, or big dust loading in the
medium, please also inform the designer.
2. How about your company’s pre-sales service and after-sales
service?
Answers: Before our cooperation, we have the professional technical
team to help you make the technical solution according to your
working condition, to make sure the centrifugal fan efficiency
operation.
After sales service, we will offer 12 months’ repairing service,
and provide lifelong follow-up services. Besides, our engineers are
available for going abroad to offer the repairing service.
3. Does your company have qualifications?
Answers: SIMO Blower has obtained ISO 9001-2008, CE, BV
certifications and so on.
