High Pressure High Temperature Materials Cooling Centrifugal
Ventilation Fans
Introduction
The High Pressure High Temperature Materials Cooling Centrifugal
Ventilation Fans can output high gas pressure, suitable for conveying normal or
high temperature clean gas/combustible gas/corrosive gas/mixed with
a few impurities, light particles/debris/short fiber materials.
The most commonly used for forced ventilation, rapid drying, rapid
cooling and heat dissipation, cement production line chiller
cooling, clinker cooler, circulating fluidized bed system, air
purification and industrial waste gas treatment, flue gas
desulfurization industrial boilers or incinerators forced draft/
induced draft/ primary/ secondary air, ventilation of large mill
system, industrial waste heat recovery device, blasting of smelting
furnace and casting furnace, combustion of blast furnace, coal
injection of blast furnace, pressurized transportation of gas,
Pressurization or decompression sealing of industrial equipment.
High Pressure High Temperature Materials Cooling Centrifugal
Ventilation Fans can output very high pressure and can work at higher medium
temperature, suitable for any industrial occasion where high
pressure & high temperature gas needs to be delivered.In the case
of using the common base , the installation is very simple and
basically does not require the support of professional
technicians.The bearing box is reserved with the temperature and
vibration sensor installation position, which can conveniently
install the fan operation monitoring device. When the airflow
resistance is increased, the motor load will be automatically
reduced and the motor will not be burnt.
Technical data
| series | model | Rotation Speed
(r/min) | Total Pressure
(Pa) | Air Capacity
(m³/h) | Power
(kW) |
|---|
| 9-10 | 8C | 1450～2900 | 3231～15034 | 3297～14287 | 7.5～110 |
| 9C | 1450 | 4101～4597 | 4695～10717 | 15～22 |
| 10C | 1450 | 4958～5840 | 6440～15455 | 30～37 |
| 11.2C | 960～1450 | 2705～7364 | 5990～21713 | 15～75 |
| 12.5C | 960～1450 | 3975～9229 | 8327～30186 | 22～110 |
| 14C | 960～1450 | 4249～11668 | 11699～42409 | 37～220 |
| 16C | 960～1450 | 5575～15425 | 17463～63305 | 75～315 |
Advantages and Features
1.Customized design according to customer performance requirements,
and optimized by CFD technology, the energy consumption is lower
than similar models.
2.The Centrifugal Ventilation Fan parts are closely matched and have good sealing performance to
ensure the output pressure will not be reduced.
3.The Centrifugal Ventilation Fan impeller is calibrated by high standards for dynamic balance to
ensure stable operation of the fan.
4. Running test and vibration value detection after the production
is completed, the fan operation is reliable.
5.There are a variety of part options to choose from.
