Coupling Driven Air Purification Middle Pressure Centrifugal
Venlation Fans
Introduction
This centrifugal fan is specially designed for dust exhaustion
jointly designed by the fan industry. This series of fans has the
characteristics of not easy to accumulate dust and wear resistance,
and has the characteristics of high efficiency and low noise. It is
a centrifugal fan product series with a wide performance
range.According to fan parameters you need, SIMO can make
centrifugal blower fan technical solution for you. Below fan
picture for your reference.
Application
It is suitable for discharging gas containing dust, wood scraps,
fine broken fibers, etc. If there are hard particles, a dust
removal device must be added in front of the fan, and it can also
be used for general ventilation.
Technical data
Centrifugal Venlation Series | Centrifugal Venlation Model | Rotation Speed
(r/min) | Total Pressure
(Pa) | Air Capacity
(m3/h) | Power
(kW) |
|---|
| 6-12 | 8D | 1450 | 1859～2745 | 11000～26400 | 15 ~ 22 |
| 9D | 1450 | 2353～3474 | 15700～37500 | 30 ~ 45 |
| 10D | 1450 | 2905～4289 | 21500～51500 | 45 ~ 75 |
| 11D | 960 ~ 1450 | 1541～5190 | 22700～68500 | 22 ~ 110 |
| 12D | 960 ~ 1450 | 1834～6176 | 24600～89000 | 37 ~ 160 |
Advantages and Features
1. According to customer performance requirements customized
design, and optimized by CFD technology, the energy consumption is
lower than similar models.
2. The blade placement angle is optimized, more wear-resistant and
longer service life.
3. The variable inlet damper can be used to flexibly adjust the
pressure and flow of the fan during operation. The variable
frequency motor can also be selected to adjust the pressure and
flow of the fan by changing the speed.
4. The fan is equipped with temperature and vibration sensors,
which can easily install the fan operation monitoring device.
5. Made of high quality carbon steel, stainless steel or other
metal materials are available upon request.
6. Ultrasonic flaw detection on the welding seam and main spindle
of the impeller to ensure that there are no welding defects or
material defects and ensure the strength.
7. Bearing cooling method: according to gas temperature and
operating environment conditions choose low-cost water-cooling
method or oil-cooling method with good heat dissipation
performance.
For extremely high temperature operating conditions, can also be
installed with an electronic cooler, absolute protection of the
reliable operation of the fan system.
8. Large parts and components are disassembled and transported, so
that most parts can be loaded into containers for transportation,
saving you shipping costs.
9. Each component has an installation number. Under the guidance of
the installation manual, the system assembly can be completed
smoothly.
10. Provide on-site arrangement and guidance services.
