Single Suction Mineral Powder Sintering Material Handling
Centrifugal Blower Fan
Introduction
The Single Suction Mineral Powder Sintering Material Handling
Centrifugal Blower Fan medium pressure centrifugal fan has moderate pressure and large
flow, belongs to the low noise series fan and has stable
performance.
It’s suitable for conveying normal temperature or high temperature
non-flammable gas (normal air, high temperature gas, corrosive gas,
dusty gas), and conveying granule/powder/chip/fiber material.
It can output higher outlet pressure and provide more gas flow with
lower noise. Ability to work stably at higher media temperatures.
Customized design according to customer's performance requirements,
and optimized by CFD technology, the energy consumption is lower
than similar models. The airflow channel and the impeller have been
optimized several times, which is more efficient and energy-saving
than ordinary large-flow fans.
Technical data
| series | model | Centrifugal Blower Rotation Speed
(r/min) | Centrifugal Blower Total Pressure
(Pa) | Centrifugal Blower Air Capacity
(m³/h) | Power
(kW) |
|---|
7-09 Centrifugal Blower | 5C | 3030 | 2982 ~ 3456 | 4486 ~ 8971 | 11 ~ 15 |
| 5.6C | 2360 | 2623～2264 | 4909～9817 | 11 |
| 7.1C | 1830 ~ 2450 | 2188 ~ 3862 | 7757～20771 | 15 ~ 30 |
| 8C | 1910 | 3517～3034 | 11582～23164 | 30 |
| 9C | 1570 | 3002～2591 | 13555～27111 | 30 |
| 10C | 1470 ~ 1650 | 2806 ~ 4109 | 17410 ～ 36478 | 45 ~ 55 |
Advantages and Features
1.For the material of impeller and main shaft, we will choose
high-strength carbon steel, low-alloy steel, high-temperature alloy
steel, high temperature resistant high-strength alloy steel for
different working conditions temperature and working speed, so that
the impeller and main shaft can still maintain a reliable strength
at high temperature.
2. For dust-containing gas, we can meet various working conditions
from a small amount of dust to a very large dust content. After
special treatment, the surface hardness of the blade can reach
HRC60~70, which can extend the life of the impeller by more than 3
times.
3.The impeller is subjected to high standard dynamic balance
correction to ensure stable operation of the fan.
4.The fan system adopts a detachable design, which greatly reduces
the transportation cost of customers.
5. Each part has an installation number and can be successfully
assembled under the guidance of the installation manual.
6.Provide on-site installation guidance services.
FAQ
1. What parameters need to be provided when you design the
industrial centrifugal fans?
Answers: Air flow, total pressure or static pressure, inlet
temperature, local voltage and frequency, Altitude etc.
If there is flammable and explosive gas, or big dust loading in the
medium, please also inform the designer.
2. How about your company’s pre-sales service and after-sales
service?
Answers: Before our cooperation, we have the professional technical
team to help you make the technical solution according to your
working condition, to make sure the centrifugal fan efficiency
operation.
After sales service, we will offer 12 months’ repairing service,
and provide lifelong follow-up services. Besides, our engineers are
available for going abroad to offer the repairing service.
3. Does your company have qualifications?
Answers: SIMO Blower has obtained ISO 9001-2008, CE, BV
certifications and so on.
