Single Suction Backward Solid Waste And Hazardous Waste Treatment
Industry Blower
Introduction
The 6-06 series dust exhaust centrifugal fan has the
characteristics of low dust accumulation and wear resistant.
It is suitable for discharging gas containing dust, wood chips and
finely divided fibers (If it contains hard particles, a dust
removal device must be installed in front of the fan.), it can also
be used as a general ventilator for ventilation.
Application
Centrifugal fan is widely used in the cement industry, building
materials industry, environmental protection industry,
metallurgical industry, power industry projects such as large-scale
dust collector, industrial boilers, ventilation systems, cooling.
Technical data
| Series | Model | Blower Fan Rotation Speed
(r/min) | Blower Fan Total Pressure
(Pa) | Blower Fan Air Capacity
(m3/h) | Power
(kW) |
|---|
6-06 Blower Fan | 8D | 1450 | 1859～2745 | 11000～26400 | 15 ~ 22 |
| 9D | 1450 | 2353～3474 | 15700～37500 | 30 ~ 45 |
| 10D | 1450 | 2905～4289 | 21500～51500 | 45 ~ 75 |
| 11D | 960 ~ 1450 | 1541～5190 | 22700～68500 | 22 ~ 110 |
| 12D | 960 ~ 1450 | 1834～6176 | 24600～89000 | 37 ~ 160 |
| 13D | 960 ~ 1450 | 2152～7248 | 31200～113000 | 55 ~ 250 |
| 14D | 960 ~ 1450 | 2496～8406 | 39000～141000 | 75 ~ 400 |
| 15D | 730 ~ 1450 | 1657～9650 | 36600～172000 | 45 ~ 500 |
| 16D | 730 ~ 1450 | 1885～10980 | 44300～211000 | 75 ~ 710 |
| 17D | 730 ~ 960 | 2128～5433 | 53200～168000 | 90 ~ 280 |
| 18D | 730 ~ 960 | 2386～6091 | 63100～199000 | 110 ~ 355 |
| 19D | 730 ~ 960 | 2658～6787 | 74200～234000 | 160 ~ 500 |
| 20D | 730 ~ 960 | 2946～7520 | 86700～273000 | 200 ~ 630 |
| 21D | 580 ~ 960 | 2050～8290 | 79500～316000 | 200 ~ 800 |
| 22D | 580 ~ 960 | 2250～9099 | 92200～363000 | 220 ~ 1000 |
| 23.5D | 580 ~ 960 | 2567～10380 | 112000～443000 | 220 ~ 1400 |
| 25D | 580 ~ 730 | 6794～6464 | 134000～406000 | 355 ~ 800 |
| 26.5D | 480 ~ 730 | 2236～7633 | 132000～483000 | 220 ~ 1120 |
| 28D | 480 ~ 730 | 2496～8522 | 156000～569000 | 315 ~ 1400 |
| 29.5D | 480 ~ 730 | 2771 ~ 9460 | 183000～667000 | 400 ~ 2000 |
Advantages and Features
1.It can output higher outlet pressure and provide more gas flow at
the same time, low noise.
2. The fan speed can be flexibly set by matching different belt
pulley diameters to make the fan run at the highest efficiency
point and reduce energy waste.
3. Motor slide guide can be provided for convenient belt tensioning
to reduce energy loss caused by belt slack.
4. The bearing housing is reserved for the installation position of
temperature and vibration sensors, which can facilitate the
installation of fan operation monitoring device.
5. Use liquid lubricating oil. It is not necessary to open the
bearing housing to replace and fill the lubricating oil. The
bearing housing is provided with an observation window for easy
observation of the quality and stock of the lubricating oil.
6. The bearing housing uses labyrinth mechanical seal, unique
anti-leakage design inside, vent hole at the top, and sealing
grease at the joint, completely eliminating the possibility of oil
leakage in the bearing hosing.
7. After annealed treatment, the internal stress of the structure
generated during welding can be completely eliminated to ensure
that the impeller will not creepage and crack.
8. The impeller is subjected to a high standard of dynamic
balancing adjusting to ensure stable operation of the fan.
9. After running test and vibration value detection, the operation
is reliable.
