16Mn Medium Pressure Anticorrosion Materials Drying Induced Draft
Fan
Introduction Of Centrifugal Fan
Medium requirements for 6-08 series id fan in boiler: The medium to be transported should be non-corrosive, non-flammable,
explosive, and free of viscous substances. The dust and hard
particles contained in the medium should be no more than 150mg/m3.
This series of fans is a new type of high efficiency industrial fan
in the field of small flow and medium pressure.
Technical data
| series | model | Rotation Speed
(r/min) | Total Pressure
(Pa) | Air Capacity
(m³/h) | Power
(kW) |
|---|
| 6-08 | 12D | 1450 | 3581～5356 | 14800～35200 | 55～75 |
| 12.5D | 1450 | 3885～5808 | 16800～39800 | 55～75 |
| 13D | 1450 | 4208～6288 | 18900～44800 | 75～90 |
| 13.5D | 1450 | 4532～6779 | 21100～50200 | 90～110 |
| 14D | 1450 | 4874～7289 | 23600～55900 | 110～132 |
| 14.5D | 1450 | 5229～7819 | 26200～62200 | 132～160 |
| 15D | 1450 | 5600～8365 | 29000～68800 | 132～220 |
| 15.5D | 1450 | 5972～8934 | 32000～75900 | 160～220 |
| 16D | 1450 | 6365～9573 | 35200～83500 | 220～280 |
| 16.5D | 1450 | 6777～10121 | 38600～91600 | 250～315 |
| 17D | 1450 | 7189～10739 | 42200～100000 | 280～355 |
| 17.5D | 1450 | 7620～11386 | 46000～108000 | 315～400 |
| 18D | 1450 | 8061～12043 | 50100～119000 | 355～500 |
| 18.5D | 1450 | 8512～12720 | 54400～129000 | 450～560 |
| 19D | 1450 | 8983～13416 | 58900～140000 | 500～630 |
| 19.5D | 1450 | 9464～14132 | 63600～151000 | 560～710 |
| 20D | 1450 | 10307～14867 | 68700～163000 | 630～800 |
Application
1. Install centrifugal fans in mines and tunnels to re-enter fresh
air and exhaust dirty air to ensure air circulation in the mines
and tunnels.Centrifugal fans can help dust discharge, ensure air
transparency in mines and tunnels, and ensure the health of workers
in mines and tunnels.
2. A centrifugal fan is installed in the cooling tower, which not
only plays the role of ventilation and ensures the normal operation
of the cooling tower, but also plays a positive role in improving
the cooling effect of the cooling tower by the large flow wind
generated by the centrifugal fan.
3. Main ventilator in coal mine is an important equipment to ensure
normal ventilation in underground mine, which not only affects the
production capacity of coal mine, but also is very important to the
safety of mining industry.
Product Advantages
1. The variable inlet damper can be used to flexibly adjust the
pressure and flow of the fan during operation. The variable
frequency motor can also be selected to adjust the pressure and
flow of the fan by changing the speed.
2. The bearing housing is reserved for the installation position of
temperature and vibration sensors, which can facilitate the
installation of fan operation monitoring device.
3. After running test and vibration value detection, the operation
is reliable.
FAQ
1. What parameters need to be provided when you design the Heat
Dissipation Power Plant Blower Fan?
Answers: Air flow, total pressure or static pressure, inlet
temperature, local voltage and frequency, Altitude etc.
If there is flammable and explosive gas, or big dust loading in the
medium, please also inform the designer.
2. How about your company’s pre-sales service and after-sales
service?
Answers: Before our cooperation, we have the professional technical
team to help you make the technical solution according to your
working condition, to make sure the centrifugal fan efficiency
operation.
After sales service, we will offer 12 months’ repairing service,
and provide lifelong follow-up services. Besides, our engineers are
available for going abroad to offer the repairing service.
3. Does your company have qualifications?
Answers: SIMO Blower has obtained ISO 9001-2008, CE, TUV
certifications and so on.
